ar0330b8401dd

Remove/install guide bearing in flywheel

Type ar · topic 03.30 · version 0101 · 2020-02-21

Applies to: Engine 926.942 in model 382.171/176 Engine 926.95

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 382 (models 171, 176)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 382 (models 171, 176)

Also applies to engines/gearboxes: 926 942, 926 95*

AR03.30-B-8401DD

Remove/install guide bearing in flywheel

05.02.2020

Engine	926.942 in model 382.171/176
Engine	926.95

Remove/install guide bearing in flywheel

1	Pilot bearing
2	Spacer ring
3	Flywheel
4	Internal puller
5	Counter-support

G03.30-3112-06

 	Remove/install
1	Remove clutch
2	Remove bearing pilot (1)	 Spacer ring (2) may remain installed on the steering gear (3). If spacer ring (2) is removed, make sure to install it again in the right position. The chamfer on the spacer ring (2) must face the crankshaft.
		 Internal extractor	*000589273300
		 Counter stay	*000589343300
3	Grease the pilot bearing (1)	Antifriction paste, rubber parts 2.5 kg, DBL 6867.00	*BR00.45-Z-1002-06A
4	Install in reverse order

Remove/install guide bearing in flywheel

Remove/install guide bearing in flywheel

000 589 34 33 00

Counter stay

000 589 27 33 00

Internal extractor

Repair materials

Number	Designation	Order number
BR00.45-Z-1002-06A	Antifriction paste, rubber parts 2.5 kg, DBL 6867.00	A 000 989 01 60