ar0330b1600c

Remove/install belt pulley/vibration damper

Type ar · topic 03.30 · version 0100 · 2016-02-12

Applies to: Cumbustion engine 475 with Vehicle 695.034, 695.051Cumbustion engine 476 with Vehicle 695.024, 695.052

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.30 Flywheel, driving disc, vibration damper, starter ring gear — Series 695 (models 024, 034, 051, 052)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 695 (models 024, 034, 051, 052)

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Series 695 (models 024, 034, 051, 052)

Also applies to engines/gearboxes: 475 ***, 476 ***

AR03.30-B-1600C

Remove/install belt pulley/vibration damper

12.02.16

Cumbustion engine 475 with Vehicle 695.034, 695.051

Cumbustion engine 476 with Vehicle 695.024, 695.052

Remove/install belt pulley/vibration damper

B03.30-0023-09

1 Fan

2 Stud

3 Nut

4 Intermediate piece

5 Pulley

6 Pulley fastening screw

7 Fastening screws of the vibration absorber

8 Vibration absorber

9 Vibration absorber hub

10 Vibration absorber hub fastening screw

11 Oil baffle

Remove and install

1

Remove the belts.

AR13.21-B-0100A

2

Remove the fan (1).

For engines with hard fans (for trucks only).

AR20.40-B-5614A

For engines with hydrodynamic fan (for trucks only).

AR20.40-B-5660A

3

Release the studs (2) and remove the intermediate piece (4) and the pulley (5).

For engines with hydrodynamic fan, BM 475.950/951/954/975/979/982; 476.950/ 973/974/975/976/979/980/982/983, (applies to trucks only).

4

Loosen the screws (6) and remove the pulley (5).

For engines 475.952/953/976/977/978/984/ 985/986/987/988/989/990/991/992/993/994/ 995/996/997/998/982; 476.972/973/977/978/ 981/984/985/988/989/990/991, (applies to buses only).

*BA03.30-B-1004-01D

5

Loosen the screws (7) and remove the vibration absorber (8).

Bumping or dropping could damage the vibration absorber (8) for the viscous type.

If the vibration absorber to be removed is the type using a hub (9), loosen the screws (10) and remove the hub.

Viscous vibration absorbers cannot be placed in a vice; manually hold it on the bench and remove the hub (9).

*BA03.30-B-1002-01D

*BA03.30-B-1003-01D

6

Remove the oil baffle (11).

Install: Install the oil baffle ring (11) with the outer edge facing the inside of the engine.

7

Install in the reverse order.

Flywheel, driven plate, vibration damper, starter ring gear

Número

Denominação

Engine 475.9, 476.9

BA03.30-B-1002-01D

Vibration damper to crankshaft.

Nm

200

BA03.30-B-1003-01D

Damper to hub (for 2 part assembly)

Nm

40

BA03.30-B-1004-01D

Pulley to vibration damper.

Cast

Nm

35

Plate

Nm

25

Referenced documents