Replace front crankshaft radial sealing ring

AR03.20-S-3000E

Replace front crankshaft radial sealing ring

11.11.2013

MODEL

447 with ENGINE 651

1

Radial shaft sealing ring

2

Insertion device

3

End cover



Remove

1

Remove belt pulley

AR03.30-S-1600E

2

Remove radial shaft sealing ring (1)


Use a clean rags as a base.
Damage may occur otherwise.

 Removal and installation tool

*116589016200



Install

3

Install radial shaft sealing ring (1)

AR03.20-S-3000-01E

 Insertion tool

*651589006100

4

Install the belt pulley

AR03.30-S-1600E



Check

5

Check oil level, adjust to correct level if necessary.



Low SPAsh multigrade service engine oils (specification 228.51)

BB00.40-P-0228-51A



Low SPAsh multigrade service engine oils (specification 229.31)

BB00.40-P-0229-31A


The oil level must not lie above the maximum marking.
Engine damage can occur otherwise.

 Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness with engine running

 Visual inspection only.