ar0320p3003ogw

Replace rear radial shaft sealing ring

Type ar · topic 03.20 · version 0102 · 2017-06-17

Applies to: Engine 642 in model 213, 238, 253

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 213 · Series 238 · Series 253

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 213 · Series 238 · Series 253

Also applies to engines/gearboxes: 642 ***

AR03.20-P-3003OGW

Replace rear radial shaft sealing ring

04.05.2017

Engine

642 in model 213, 238, 253

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove end cover

AR01.40-P-8913OGW

The radial shaft sealing ring is vulcanized into the end cover and can only, therefore, be replaced together with the end cover.

2

Install in the reverse order

Referenced documents