ar0320p3000olf

Replace front crankshaft radial sealing ring

Type ar · topic 03.20 · version 0100 · 2014-03-27

Applies to: ENGINE 651 in MODEL 222

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 222 · Series 651

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 222 · Series 651

AR03.20-P-3000OLF

Replace front crankshaft radial sealing ring

25.03.2014

ENGINE

651 in MODEL 222

Replace front crankshaft radial sealing ring

1	Radial shaft sealing ring
2	Insertion tool
3	End cover

P03.20-2298-11

	Remove
1	Remove belt pulley/vibration damper		AR03.30-P-1600OLF
2	Press radial shaft sealing ring (1) out of the end cover (3) using a suitable screwdriver	 Do not damage the crankshaft and sealing surface on the end cover (3). The leaktightness of the new radial shaft sealing ring (1) will not be achieved anymore otherwise.
	Install
3	Install new radial shaft sealing ring (1) using insertion tool (2)		AR03.20-P-3000-01CD
		 Insertion tool	*651589006100
4	Install belt pulley/vibration damper		AR03.30-P-1600OLF
	Check
5	Check engine oil level, correct if necessary
			AP18.00-P-1811MP
		 The oil level of the engine must lie between "Min" and "Max". Engine damage can occur otherwise.
 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
6	Conduct engine test run and check the engine for leaks whilst it is running

Replace front crankshaft radial sealing ring

651 589 00 61 00

Insertion tool

Referenced documents

ap1800p1811mp Check engine oil level using on-board oil dipstick
ar0320p300001cd Install front crankshaft radial seal
ar0330p1600olf Remove/install belt pulley/vibration damper
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.