ar0320p3000cd

Replace front crankshaft radial sealing ring

Type ar · topic 03.20 · version 0202 · 2012-08-17

Applies to: ENGINE 651 in MODEL 166, 172, 204, 207, 212, 218, 221

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 166 · Series 172 · Series 204 · Series 207 · Series 212 · Series 218 · Series 221 · Series 651

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 166 · Series 172 · Series 204 · Series 207 · Series 212 · Series 218 · Series 221 · Series 651

AR03.20-P-3000CD

Replace front crankshaft radial sealing ring

1.8.12

ENGINE

651 in MODEL 166, 172, 204, 207, 212, 218, 221

Replace front crankshaft radial sealing ring

1	Crankshaft radial seal
2	Insertion tool
3	End cover

P03.20-2298-11

	Remove
1	Remove belt pulley/vibration damper	Model 166, 172, 204, 207, 212 (except 212.098/298), 218, 221	AR03.30-P-1600CD
		MODEL 212.098/298	AR03.30-P-1600EH
2	Press crankshaft radial sealing ring (1) out of the end cover (3) using a suitable screwdriver	 Do not damage the crankshaft and the sealing surface on end cover (3). The leaktightness of the new crankshaft radial sealing ring (1) will not be achieved anymore otherwise.
	Install
3	Install new crankshaft radial sealing ring (1) with insertion tool (2)		AR03.20-P-3000-01CD
		 Insertion tool	*651589006100
4	Install belt pulley/vibration damper	Model 166, 172, 204, 207, 212 (except 212.098/298), 218, 221	AR03.30-P-1600CD
		MODEL 212.098/298	AR03.30-P-1600EH
5	Check engine oil level, correct if necessary	 The engine oil level must lie between "Min" and "Max". Engine damage can occur otherwise.
 Danger !	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
6	Check for oil leaks with engine running

Replace front crankshaft radial sealing ring

651 589 00 61 00

Insertion tool

Referenced documents

ar0320p300001cd Install front crankshaft radial seal
ar0330p1600cd Remove/install belt pulley/vibration damper
ar0330p1600eh Remove/install belt pulley/vibration damper
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.