ar0320d4841ad

Remove/install drive gear for oil pump on crankshaft

Type ar · topic 03.20 · version 0100 · 2012-05-31

Applies to: ENGINES 900.917 /918 /919 in MODELS 668, 670

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 668 · Series 670 · Series 900 (models 917, 918, 919)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 668 · Series 670 · Series 900 (models 917, 918, 919)

EinPAS 15 Engine › 15.20 Engine lubrication system › 15.20.30 Oil pump/drive/oil spray nozzle/oil suction pipe — Series 668 · Series 670 · Series 900 (models 917, 918, 919)

AR03.20-D-4841AD

Remove/install drive gear for oil pump on crankshaft

10.5.12

ENGINES 900.917 /918 /919 in MODELS 668, 670

Remove/install drive gear for oil pump on crankshaft

W03.20-1133-06

1 Drive gear

2 Crankshaft

Arrow Groove

Removing

1

Remove crankshaft (2)

AR03.20-D-4351AD

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

2

Heat drive gear (1) with hot air gun and remove from the crankshaft (2)

Install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Heat drive gear (1) with hot air gun up to about 200°C and mount on the crankshaft (2)

Check temperature with the temperature measuring instrument.
Observe installation position of groove (arrow) on drive gear (1).

4

Install crankshaft (2)

AR03.20-D-4351AD

Referenced documents