Replace front crankshaft radial seal · ar0320d3000d · Mercedes-Benz WIS

AR03.20-D-3000D

Replace front crankshaft radial seal

6.4.99

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

D03.20-1101-06

1 Crankshaft radial seal

2 Belt pulley

3  Insertion tool

4 Washer

5 Screw

 	Remove/install
1	Remove belt pulley/vibration damper (2)		AR03.30-D-1600G
2	Use a screwdriver to press out crankshaft radial seal (1)	 Do not damage crankshaft and mounting hole for radial seal ring, use a clean cloth as a base.
		Installation: Install front crankshaft radial seal	AR03.20-P-3000-01C
			*611589001400
3	Install in the reverse order
Danger!	Risk of accident from vehicle starting off by itself when engine running. Risk of injury from contusions and burns if you insert your hands into the engine when it is started or when it is running	Secure vehicle to prevent it moving off. Wear closed and close-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
4	Inspect for oil leaks	 Run engine until warm, switch off and inspect for leaks.

611 589 00 14 00

Insertion tool

ar0320p300001c Installing front crankshaft radial seal
ar0330d1600g Remove/install belt pulley/vibration damper
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.