ar0320b3000c

Replace front crankshaft radial sealing ring

Type ar · topic 03.20 · version 0100 · 2016-02-12

Applies to: Cumbustion engine 612 with Vehicle 979.013, 979.016

Where it sits

Function group 1 Engine › 03 Crank assembly › 03.20 Crankshaft — Series 979 (models 013, 016)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Series 979 (models 013, 016)

Also applies to engines/gearboxes: 612 ***

AR03.20-B-3000C

Replace front crankshaft radial sealing ring

12.02.16

Cumbustion engine 612 with Vehicle 979.013, 979.016

Replace front crankshaft radial sealing ring

D03.20-1101-06

1 Crankshaft radial seal

2 Pulley

3 Assembling bushing

4 Washer

5 Bolt

	Remove and install
1	Removing the anti-vibration pulley		AR03.30-B-1600F
2	Pull the radial seal (1) from the crankshaft prying it with a screwdriver.	 Pay attention and do not damage the crankshaft and the seal's seat. Utilize a clean cloth as a base.
		 Installing the crankshaft front radial seal.	AR03.20-B-3000-01A
			*611589001400
3	Install in reverse order.
Danger!	Risk of accidents by automatic start-up with the engine running. Risk of injuries by pinching or burns when intervening during engine start-up or when this is running	Protect the vehicle against a possible automatic start-up. Utilize closed and tight-fitting work clothes. Do not touch heated or moving parts.	AS00.00-B-0005-01A
4	Check for oil tightness.	 Run the engine and let it warm-up, stop and check for tightness.

Replace front crankshaft radial sealing ring

611 589 00 14 00

Assembling bushing

Referenced documents

ar0320b300001a Install front crankshaft radial seal
ar0330b1600f Remove/install belt pulley/vibration damper
as0000b000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.