1 | Electrical connector |
2 | Hydraulic line |
3 | Housing |
4 | O-ring |
5 | Hydraulic constant throttle solenoid valve |
G01.50-A000-04
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Switch off ignition. | ||
2 | Disconnect electrical connector (1). | ||
3.1 | Remove hydraulic constant throttle solenoid valve (5) at housing (3). | When removing hydraulic constant throttle solenoid valve (5). | |
Collect engine oil which flows out in a suitable vessel. | |||
Hydraulic constant throttle solenoid valve to crankcase | |||
3.2 | Remove housing (3) with hydraulic constant throttle solenoid valve (5). | When removing housing (3) with installed hydraulic constant throttle solenoid valve (5). | |
Installation: Collect engine oil which flows out in a suitable vessel. Replace sealing rings of hydraulic line (2) and seal under housing (3). | |||
4 | Install in the reverse order | ||
5 | Check engine oil level, correct if necessary. | For approved engine oils, see the manufacturer's Specifications for Operating Fluids. | |
6 | Start engine and allow to run in idle for approx. 10 s until oil pressure has built up and then run engine at varying speeds. | See information from body manufacturer. | |
7 | Switch off engine and check for leaks in area of hydraulic constant throttle solenoid valve (5). | Visual inspection. |
Referenced documents
- ah0000n000101a Notes on self-locking nuts and bolts
- ah0000n500001h Notes on avoiding damage through contamination and foreign objects
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
- as1800z000101a Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil