W01.50-1042-09
1 | Heat baffle plate | 4 | Top Brake piping | 7 | O-Ring | ||
2 | Exhaust manifold | 5 | Electric connection | Y49 | Hydraulic Top Brake electromagnetic valve | ||
3 | Heat baffle plate | 6 | Support |
| Remove/install | ||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
1 | Turn off ignition | ||
2 | Tilt the cabin | ||
Topical note | Notes on tilting the cab | ||
3 | Remove the acoustic lining in the frame upper right side | ||
4 | Remove the heat deflector plate (1) above the exhaust manifold (2) | Heat baffle plate in the exhaust manifold | |
5 | Remove the heat deflector plate (3) in the exhaust manifold lower front part (2) | Heat baffle plate in the exhaust manifold | |
6 | Clean with compressed air the area around the hydraulic Top Brake electromagnetic valve (Y49) | ||
7 | Remove the Top Brake piping (4) | Collect the leaked engine oil. | |
Installation: Replace the sealing rings. | |||
8 | Separate the electrical connection from the (5) hydraulic Top Brake electromagnetic valve (Y49) | ||
9 | Remove the bracket (6) | ||
10 | Remove the hydraulic Top Brake electromagnetic valve (Y49) | Displace the electrical cable through the socket wrench adapter cut. | |
Installation: replace the O-Ring (7). | |||
.Top brake solenoid valve (constant throttle) | |||
Socket | |||
11 | Install on the reverse order |
457 589 00 09 00
Socket
Referenced documents
- ah6080n000301a Notes on tilting the cab
- as6080z000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted