Remove/install bottom part of oil pan · ar0145p7555tk · Mercedes-Benz WIS

AR01.45-P-7555TK

Remove/install bottom part of oil pan

13.4.10

ENGINES 642.921 in MODEL 211.084 /089 /284 /289

P01.45-2245-11

1 Oil pan bottom section

2 Bolts

3 Plug connection

 	Remove/install
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it moving off. Wear closed and close-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle		AR00.60-P-1000T
2	Drain/collect engine oil	 Installation: Replace sealing ring of oil drain screw.
	Engine oil and filter change		AP18.00-P-0101TI
			*BA01.45-P-1006-01Q
		 Engine oil	*BF18.00-P-1001-01S
3	Separate connector (3)
4	Remove bolt (2)		*BA01.45-P-1003-01Q
5	Detach oil pan bottom section (1)
	Notes on sealant path for oil pan		AH01.45-P-0001-01OM
		Loctite sealant 5970	*BR00.45-Z-1013-01A
	Clean
6	Clean sealing surfaces	 Do not use any sharp-edged tools or abrasive paper as this will damage the sealing surfaces.	AR01.00-P-0050-01A
		Loctite 7200	*BR00.45-Z-1038-04A
		Cleaning spray, Loctite 7063 (150ml)	*BR00.45-Z-1046-04A
7	Install in the reverse order
	Checking
8	Check engine oil level	 In order to avoid measurement errors, vehicle must be parked on an even surface.	AR18.00-P-3035-01TI
		 Shut off engine once it has reached operating temperature and wait approx. 5 minutes before checking engine oil level.
9	Check for leaks with engine running

 Oil pan

Number	Designation			Engine 642


BA01.45-P-1003-01Q	Oil pan bottom section to oil pan top section	M6	Nm	14
BA01.45-P-1006-01Q	Oil drain screw to oil pan	M12	Nm	30
		M24	Nm	45

 Engine lubrication system

Number	Designation			Engine 642.910/920/921 with particulate filter


BF18.00-P-1001-01S	Engine oil	Filling capacity (oil and filter change)	Liters	8.5
		Specifications for Operating Fluids	Sheet	BB00.40-P-0228-51A
			Sheet	BB00.40-P-0229-31A
			Sheet	BB00.40-P-0229-51A

Repair materials

Number	Designation	Order number
BR00.45-Z-1013-01A	Loctite sealant 5970	A 003 989 98 20
BR00.45-Z-1038-04A	Loctite 7200	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 München Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de
BR00.45-Z-1046-04A	Cleaning spray, Loctite 7063 (150ml)	A 001 986 71 71 10

Referenced documents

ah0145p000101om Notes on sealant path for oil pan
ar0060p1000t Lift/jack up vehicle
ar0100p005001a Remove sealant
ar1800p303501ti Check oil level
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.