1 | Hose |
2 | Oil pan |
3 | Seal |
4 | Crankcase |
N01.45-2047-06
Notes on engine oil | |||
| Remove/install | ||
1 | Unscrew drain screw from oil pan (2) and catch engine coil running out in suitable container | Installation: Replace sealant on drain screw. | |
Drain screw on oil pan | |||
Engine oil | |||
2 | Remove hose (1) from oil pan (2) | ||
3 | Remove oil pan (2) | Bolt, oil pan to cylinder crankcase | |
Nut, oil pan to cylinder crankcase | |||
4 | Remove seal (3) | Installation: Clean sealing surfaces on the crankcase (4) and on the oil pan (2) and coat the 4 corners (arrows) with sealant. | |
Sealant, Loctite 5970, 50 ml | |||
5 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Perform engine test run and check engine in area of the oil pan (2) for leaktightness | |
Referenced documents
- ah1800n010101f Notes on engine oil
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.