Remove/install cap with front radial shaft sealing ring

AR01.40-P-8922MRT

Remove/install cap with front radial shaft sealing ring

14.02.2020

Engine

256.9 in model 222

1

End cover

4

Radial shaft sealing ring

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Drain engine oil.



AP18.00-P-0101MRT

 Installation: Install bottom center engine compartment lining only after the leak test.

2

Remove vibration damper.

AR03.30-P-1800MRT

3

Remove end cover (1) with radial shaft sealing ring (4).

AR01.40-P-8922-03MRT

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

*BR00.45-Z-1002-06A

 Screw/bolt, end cover to crankcase/oil pan (belt side)

*BA01.40-P-1001-03MRT

 Insertion device

*654589004300

4

Install in the reverse order.



Check

5

Check engine oil level and correct.



AP18.00-P-1812SKI

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Perform engine test run and check engine for leak tightness.

7

Install bottom center engine compartment lining.

AR61.20-P-1105LF

 Crankcase, timing case, end cover

Number

Designation

Engine 256.9

BA01.40-P-1001-03MRT

Screw/bolt, end cover to crankcase/oil pan (belt side)

Stage 1

Nm

8

Stage 2

°

30

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Antifriction paste, rubber parts 2.5 kg, DBL 6867.00

A 000 989 01 60