ar0140d9273a

Installing cylinder liner

Type ar · topic 01.40 · version 0102 · 1997-11-08

Applies to: ENGINE 601.943, 602.980 /982 /984 /985

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.40 Crankcase, timing case cover, end cover — Series 601 (models 943) · Series 602 (models 980, 982, 984, 985)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.31 Crankcase/oil separator/ventilation — Series 601 (models 943) · Series 602 (models 980, 982, 984, 985)

AR01.40-D-9273A

Installing cylinder liner

4.12.96

ENGINE 601.943, 602.980 /982 /984 /985

Installing cylinder liner

P01.40-0302-06

1 Crankcase

2 Cylinder liner

Installing

1.1

Widen cylinder bore in crankcase (1)

On engines without cylinder liner

AR01.40-D-9271A

1.2

Remove cylinder liner

On engines with cylinder liner

AR01.40-D-9272A

2

Place crankcase (1) onto the press and align

3

Place new cylinder liner (2) onto the bore and align at right angles

4

Press in cylinder liner (2)

Use a suitable plate for pressing in. Inspect cylinder liner seat for abrasion and clean with compressed air, if necessary. After pressing in cylinder liner, continue to apply pressure (settling pressure) for about 7 seconds more.

5

Face contact surface of the crankcase (1) together with the timing case cover

Keep the stock removal at contact surface to the minimum possible

AR01.40-D-9133A

6

Clean crankcase (1)

7

Bore and hone cylinder bores

AR01.40-D-9271A

Referenced documents