ar0120p0010mcc

Remove/install crankcase ventilation valve (partial load)

Type ar · topic 01.20 · version 0101 · 2007-09-10

Applies to: ENGINE 132.9 in MODEL 451.3 /4

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.20 Crankcase ventilation, cylinder head cover — Series 451 (models 3**, 4**)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.31 Crankcase/oil separator/ventilation — Series 451 (models 3**, 4**)

Also applies to engines/gearboxes: 132 9**

AR01.20-P-0010MCC

Remove/install crankcase ventilation valve (partial load)

21.8.07

ENGINE 132.9 in MODEL 451.3 /4

Remove/install crankcase ventilation valve (partial load)

P01.20-2212-04

1 Crankcase ventilation valve

2 Grommet

3 Hose

Remove/install

1.1

Remove intake manifold

For engine 132.910

AR09.20-P-1310MCC

1.2

Remove charge air manifold

For engine 132.930

AR09.41-P-1310MCC

2

Remove crankcase ventilation valve (1) from grommet (2) on partial load vent plate

Installation: Check hose (3) on crankcase ventilation valve (1); replace if necessary.

3

Remove grommet (2) from partial load ventilation plate

Installation: Check grommet (2) and replace if necessary.

4

Detach clamp and detach crankcase ventilation valve (1) from hose (3)

When replacing crankcase ventilation valve (1).

5

Install in the reverse order

Referenced documents