ar0120l5014vb

Remove/install cylinder head cover

Type ar · topic 01.20 · version 0100 · 2003-03-12

Applies to: ENGINE 166.961 /991 in MODEL 414.700

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.20 Crankcase ventilation, cylinder head cover — Series 166 (models 961, 991) · Series 414 (models 700)

EinPAS 15 Engine › 15.16 Cylinder head › 15.16.30 Cylinder head cover — Series 166 (models 961, 991) · Series 414 (models 700)

AR01.20-L-5014VB

Remove/install cylinder head cover

17.9.01

ENGINE 166.961 /991 in MODEL 414.700

Remove/install cylinder head cover

P01.20-0231-06

1 Torx bolt

2 Cylinder head cover

3 Shaped rubber gasket

4 Clamp

5 Crankcase ventilation line

6 CMP sensor connector

Remove/install

1

Remove induction module

AR09.20-L-1400VB

2

Separate camshaft position sensor connector (6)

3

Detach engine breather pipe (5) at cylinder head cover (2)

Inspect condition of collar clamp (4), replace if necessary

4

Take off air pump switchover valve at cylinder head cover

AR14.30-P-7255GF

5

Detach cylinder head cover (2) at cylinder head and take off together with rubber gasket (3)

Inspect condition of shaped rubber gasket (3), replace if necessary. Clean sealing surfaces.

Installation: Pay attention to tightening diagram of cylinder head cover (2)

AR01.20-L-5014-03VB

*BA01.20-P-1001-01F

6

Install in the reverse order

Crankcase ventilation, cylinder head cover

Number

Designation

Engine 166.961/991

BA01.20-P-1001-01F

Bolt of cylinder head cover to cylinder head

Nm

8

Referenced documents