ar0110s3000e
Remove/install major assembly carrier
Type ar · topic 01.10 · version 0100 · 2015-01-07
Applies to: MODEL 447 with ENGINE 651
Where it sits
Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.10 Complete engine — Series 447 · Series 651
EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Series 447 · Series 651
EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.30 Pump/thermostat/preheater — Series 447 · Series 651
EinPAS 25 On-board/network/multifunction › 25.20 On-board electrical system › 25.20.30 Alternator — Series 447 · Series 651
EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.40 Refrigerant compressor — Series 447 · Series 651
AR01.10-S-3000E
| Remove/install major assembly carrier
| 11.12.2014
|
MODEL
| 447 with ENGINE 651
|
1
| Vacuum hose
|
2
| Bracket
|
3
| Screw/bolt
|
4
| Screw/bolt
|
5
| Screw/bolt
|
6
| Major assembly carrier
|
| Remove/install
|
|
|
1
| Remove tensioning device for poly-V belt
|
| AR13.25-S-3200EE
|
2
| Remove guide pulley
|
| AR13.21-S-3350E
|
3
| Remove belt pulley
|
| AR03.30-S-1600E
|
4
| Remove refrigerant compressor and lay down to the side with connected refrigerant lines
|
Model 447 with code HH4 (THERMOTRONIC AAC) Model 447 with code HH9 (A/C, semi-automatic regulated, TEMPMATIC)
| AR83.55-S-5300E
|
|
|
| Do not suction off refrigerant.
|
|
5
| Remove alternator and place to one side with the lines connected
|
| AR15.40-S-5032E
|
6
| Remove vacuum hoses (1)
|
|
|
7
| Remove bracket (2)
| Remove screw/bolt (3) to do this.
|
|
|
|
| Screw/bolt, major assembly carrier to crankcase
| *BA01.40-N-1009-01Q
|
8
| Remove screw/bolt (4)
| M6
| *BA00.10-N-1002-01A
|
9
| Remove screw/bolts (5)
| Screw/bolt, major assembly carrier to crankcase
| *BA01.40-N-1009-01Q
|
10
| Remove major assembly carrier (6)
|
|
|
11
| Install in the reverse order
|
|
|
Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread
|
Number
| Designation
|
|
| 8.8
| 10.9
|
BA00.10-N-1002-01A
| M6
| Galvanized
| Nm
| 9
| 13
|
|
|
| Phosphated
| Nm
| 9
| 12
|
Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread
|
Number
| Designation
|
|
| 12.9
|
BA00.10-N-1002-01A
| M6
| Galvanized
| Nm
| 16
|
|
|
| Phosphated
| Nm
| 14
|
Crankcase, timing case cover, end cover
|
Number
| Designation
|
|
| ENGINE 651 in MODEL 447
|
BA01.40-N-1009-01Q
| Screw/bolt, major assembly carrier to crankcase
| M6
| Nm
| –
|
|
|
| M8
| Nm
| 20
|
Referenced documents
