Applies to: Model 447 with engine 651 except code ZG2 (Permanent all-wheel drive) Model 447, 448 with engine 274
Where it sits
Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.10 Complete engine — Series 447 · Series 448 · Series 651
EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.30 Housing/cap/oil pan/mounting — Series 447 · Series 448 · Series 651
Also applies to engines/gearboxes: 274 ***
AR01.10-S-2400-04E
Install transmission support
Model
447 with engine 651
except code ZG2 (Permanent all-wheel drive)
Model
447, 448 with engine 274
447 589 00 62 00
Holding device
The lower engine compartment paneling must be removed.
S01.10-4607-09
Shown with TRANSMISSION 711.6
1
Insert holding device (1).
To do this hang in holding device (1) as shown at the front on integral carrier, hook in rear sliding piece (2) on integral carrier and fasten holding device (1).
2
Place support brace (3) upwards and fasten.
The support brace (3) must lie on the transmission or on engine according to the continued work.
