ar0110p3000so

Removing and installing the major asembly carrier

Type ar · topic 01.10 · version 0102 · 2008-10-06

Applies to: ENGINE 660.940 in MODEL 450.3 /4 (except , 450.418) except CODE (I01) Air conditioning Plus (with outside temperature indicator) (FFO) except CODE (I29) Air conditioning Plus (with combination filter and outside temperature indicator) smart & passion

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.10 Complete engine — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Series 660 (models 940)

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Series 660 (models 940)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.30 Pump/thermostat/preheater — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Series 660 (models 940)

EinPAS 25 On-board/network/multifunction › 25.20 On-board electrical system › 25.20.30 Alternator — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Series 660 (models 940)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.40 Refrigerant compressor — Series 450 (models 3**, 400, 401, 402, 403, 414, 432, 433, 441, 442, 443, 452) · Series 660 (models 940)

AR01.10-P-3000SO

Removing and installing the major asembly carrier

1.10.08

ENGINE 660.940 in MODEL 450.3 /4 (except , 450.418)
except CODE (I01) Air conditioning Plus (with outside temperature indicator) (FFO)
except CODE (I29) Air conditioning Plus (with combination filter and outside temperature indicator) smart & passion

Removing and installing the major asembly carrier

P01.10-2426-04

1 Bolt

2 Nut

3 Bolts

4 Water supply connection fitting

5 Bolt

6 Major assembly carrier

Remove/install

1

Remove coolant pump

AR20.10-P-1271SM

2

Unscrew bolt (1) and remove with nut (2)

3

Unscrew bolts (3) and remove water connecting pipe (4)

*BA20.10-P-1006-01K

4

Remove screw (5)

Installation: Replace the sealant ring on the bolt (5).

*BA20.10-P-1004-01K

5

Unscrew bolts from major assembly carrier (6) and remove major assembly carrier (6)

Installation: Install new sealing rings.

*BA20.10-P-1003-01K

6

Install in the reverse order

Coolant pump, coolant thermostat

Number

Designation

Engine 660.940

BA20.10-P-1003-01K

Bolt of major assembly carrier to crankcase

Nm

20

BA20.10-P-1004-01K

Screw connection on the major assembly carrier

Nm

14

BA20.10-P-1006-01K

Bolt for the water supply connection fitting on the major assembly carrier

Nm

9.5

Referenced documents