ar0110d0110a

Cranking engine with starter

Type ar · topic 01.10 · version 0103 · 2011-02-22

Applies to: ENGINE 602.980, 601.943 in MODEL 901, 902, 903, 904

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.10 Complete engine — Series 601 (models 943) · Series 602 (models 980) · Series 901 · Series 902 · Series 903 · Series 904

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 601 (models 943) · Series 602 (models 980) · Series 901 · Series 902 · Series 903 · Series 904

AR01.10-D-0110A

Cranking engine with starter

10.2.11

ENGINE 602.980, 601.943 in MODEL 901, 902, 903, 904

Cranking engine with starter

D01.10-0003-06

01 Compression tester

02 Contact switch

Removing, installing

1

Switch off ignition

Key in ignition/starter switch in position 0

2

Connect contact switch of the compression pressure recorder

Model 901, 902, 903, 904

AR01.10-D-0010-01A

Danger!

Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running.

Secure vehicle to prevent it starting off.
Wear closed and close-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

3

Crank engine

Press contact switch (02) of compression tester (01) for this step.

Do not crank engine with the ignition/starter switch.

*001589762100

4

Install in the reverse order

Cranking engine with starter
Cranking engine with starter

201 589 00 99 00

001 589 76 21 00

Compression tester

Electrical connection set

Referenced documents