ar0100s0200b

Inspecting cylinders with light probe

Type ar · topic 01.00 · version 0105 · 2006-07-26

Applies to: ENGINE 601 in MODEL 638

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 601 · Series 638

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 601 · Series 638

AR01.00-S-0200B

Inspecting cylinders with light probe

27.3.95

ENGINE 601 in MODEL 638

Inspecting cylinders with light probe

S01.00-2004-09

1 Cylinder lighting instrument

2 Test probe

Removing, installing

1

Remove the prechamber

AR01.30-S-5402A

2

Position the cylinder piston to be tested in the PMI

Rotate the engine by the crankshaft

AR01.00-S-0120B

3

Connect the cylinder lighting instrument (1) and insert the test probe (2) of the lighting instrument into the cylinder through the sparkplug bore.

*WH58.30-Z-1014-05A

Checking

4

General notes on inspecting cylinder surfaces

Distinguish between "optic lines" and tear lines"

AH01.00-N-0300-01A

if in doubt

Remove the cylinder head

AR01.30-S-5800B

5

Check the other cylinders in the same way

6

Installation in reverse order

Commercially available tools

Number

Designation

WH58.30-Z-1014-05A

Cylinder inspection equipment

Referenced documents