Detaching and attaching the engine wiring harness on the engine

Type ar · topic 01.00 · version 0100 · 2005-03-16

Applies to: ENGINE 122.950 in MODEL 454.0 Bei Ausbau Motor

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 454 (models 0**)

EinPAS 25 On-board/network/multifunction › 25.25 Main wiring harness › 25.25.20 Engine wiring harness — Series 454 (models 0**)

Also applies to engines/gearboxes: 122 950

AR01.00-P-2420-01FB

Detaching and attaching the engine wiring harness on the engine

P01.10-2655-06

1 Unclip electric wiring harnesses (1) on brackets on the left longitudinal member (2).

2 Remove bolt (3) and take off ground line (4) on left longitudinal member (2).

3 Disconnect ground line (arrow) on left longitudinal member (2).

4 Unplug connector (5).

P01.10-2654-06

5 Bend covering cap (6) to the side outwards and pull upwards.

6 Disconnect electrical line (8, 9) at positive terminal (7) and unfasten from the brackets.

7 Disconnect ground line (10) on right longitudinal member (11).