1 | Compression recorder |
2 | Adapter |
3 | Screw-in piece |
P01.00-3302-03
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Warm up engine to normal operating temperature. | ||
2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
3 | Remove glow plugs. | ||
4 | Crank engine with starter | ||
Crank engine several times to eliminate combustion residues in cylinders. | |||
5 | Attach screw-in piece (3) with the check valve installed into the glow plug hole for the cylinder to be checked. | Screw-in fitting | |
6 | Attach flexible adapter (2) to compression pressure recorder (1). | Compression tester | |
7 | Connect compression pressure recorder (1) with flexible adapter (2) to screw-in piece (3). | Compression tester | |
Screw-in fitting | |||
| Check | ||
8 | Crank the engine with the starter and check the compression pressure. | ||
Crank engine with starter for at least 8 revolutions | |||
9 | Perform check process in cylinder order on remaining cylinders in same manner. | ||
10 | Compare measured pressure values with specified test values. | Installation tolerance or new value of compression pressure | |
Wear limit or limit value of compression pressure | |||
Compression pressure, permissible difference between the cylinders | |||
If the compression pressure is outside the tolerance range, | |||
| |||
Check cylinder leakage. | |||
11 | Install in the reverse order. | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
12 | Carry out engine test run and check engine for proper leaktightness and leaktightness. |
001 589 76 21 00
Compression tester
642 589 02 63 00
Screw-in fitting
Referenced documents
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ar0100p1300oid Check cylinders for leaks
- ar0110p0110oid Crank engine with starter
- ar1520p4111oid Remove/install glow plugs
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.