ar0100p0200lfc

Inspect cylinders with a light probe

Type ar · topic 01.00 · version 0200 · 2019-08-26

Applies to: Engine 152, 276 in model 172

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 172

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 172

Also applies to engines/gearboxes: 152 ***, 276 ***

AR01.00-P-0200LFC

Inspect cylinders with a light probe

08.08.2019

Engine

152, 276 in model 172

Modification notes

05.08.2019

Information document AH05.30-P-1000-02SZ, added.

Operation step 5.

Inspect cylinders with a light probe

1

Endoscope

P01.00-3452-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Release clamps of the charge air lines from the charge air cooler, unclip charge air cooler from the bottom retaining clamp, and pull charge air cooler forward with connected coolant lines.


Engine 276.8 in model 172

AR09.41-P-6819RKA

2

Remove spark plug from the cylinder to be tested.

Engine 152, 276 in model 172

AP15.10-P-1580V

3

Turn engine at the center bolt of the crankshaft in the direction of engine rotation until the piston of the cylinder to be checked is at bottom dead center.

Socket wrench bit

*001589650900

4

Connect endoscope (1) and insert flexible endoscope through spark plug thread bore into the cylinder to be checked.

000 588 01 21 00 Endoscope

WS01.00-P-0097B

5

Check cylinder barrels, piston crowns, and valves.

General information on checking valves, valve seats and valve guides

AH05.30-P-1000-02SZ

General information on inspecting cylinder walls

Engine 276.8 in model 172

AH01.00-P-0300-01AMG

General information on inspecting cylinder walls

Engine 276.9 in model 172

AH01.00-P-0300-01A

General information on inspecting cylinder walls

Engine 152 in model 172

AH01.00-P-0300-01VA

If the condition of the cylinder barrels is not clearly recognizable,

Remove cylinder head.

Right cylinder head
Engine 276.8 in model 172

AR01.30-P-5780WA

Right cylinder head
Engine 276.9 in model 172

AR01.30-P-5780W

Right cylinder head
Engine 152.9 in model 172.4

AR01.30-P-5780MMI

Left cylinder head
Engine 276.8 in model 172

AR01.30-P-5770WA

Left cylinder head
Engine 276.9 in model 172

AR01.30-P-5770W

Left cylinder head
Engine 152.9 in model 172.4

AR01.30-P-5770MMI

6

Install in the reverse order.

Inspect cylinders with a light probe

001 589 65 09 00

Socket wrench bit

Referenced documents