ar0100p0100m

Cranking the engine

Type ar · topic 01.00 · version 0102 · 2005-03-02

Applies to: ENGINE 628.960 in MODELS 220.028 /128 Crank engine at the torque converter ENGINE 628.961 in MODEL 211.028 Crank engine at the torque converter ENGINE 275.950 in MODEL 220.176 Crank engine at the torque converter

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 211 (models 028) · Series 220 (models 028, 128, 176) · Series 628 (models 960, 961)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 211 (models 028) · Series 220 (models 028, 128, 176) · Series 628 (models 960, 961)

Also applies to engines/gearboxes: 275 950

AR01.00-P-0100M

Cranking the engine

11.4.03

ENGINE 628.960 in MODELS 220.028 /128
Crank engine at the torque converter

ENGINE 628.961 in MODEL 211.028
Crank engine at the torque converter

ENGINE 275.950 in MODEL 220.176
Crank engine at the torque converter

Cranking the engine

P01.00-2380-08

1 Cover

2 Screwdriver

4 Converter housing

3 Torque converter

Removing/installing

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1.1

Remove rear part of sound installation bottom section

Model 211

AR94.30-P-5300T

Model 220

AR94.30-P-5300M

1.2

Detach rear part of lower engine compartment paneling

Model 220

AR61.20-P-1105M

2

Remove cover (1)

3

Crank engine using a wide screwdriver (2) stepwise in the direction of rotation of the engine (arrow)

Place the screwdriver blade on the torque converter (3) and support the screwdriver shaft on the converter housing (4).

4

Install in reverse order

Referenced documents