Inspect cylinder using a light probe · ar0100d0200ad · Mercedes-Benz WIS

AR01.00-D-0200AD

Inspect cylinder using a light probe

16.8.06

ENGINE 900.917 /918 /919 in MODEL 668, 670

D01.00-1114-06

Shown on cylinder 4

1  Flexible endoscope

2  Cylinder inspection equipment

	Removing
1	Remove nozzle holder combinations		AR07.03-D-6831AD
2	Take off end cover of timing case and attach cranking device		*904589046300
	Checking
3	Set piston of cylinder to be inspected to BDC using cranking device		*904589046300
4	Insert flexible endoscope (1) through opening into cylinder	 Pay attention to manufacturer's operating instructions.
			*WH58.30-Z-1006-05A
			*WH58.30-Z-1007-05A
			*WH58.30-Z-1014-05A
5	Inspect cylinder barrel and piston crown	 In the event of a complaint or for further inspection: 
		Remove cylinder head	AR01.30-D-5800AD
	Notes for evaluation of cylinder contact surface		AH01.40-N-0001-03A
	Information for assessment of piston and piston rings		AH03.10-N-0001-04A
6	Inspect remaining cylinders in the same way
	Install
7	Take off cranking device at timing case and attach end cover		*BA01.60-N-1002-01A
			*904589046300
8	Install nozzle holder combinations		AR07.03-D-6831AD

 Timing case

Number	Designation		Engine 900.9, 902.9, 904.9, 906.9


BA01.60-N-1002-01A	Inspection hole closure cover to timing case	Nm	25

904 589 04 63 00

Cranking device

Commercially available tools

Number	Designation
WH58.30-Z-1006-05A	Flexible endoscope, package contents 1 (complete unit), Company Richard Wolf GmbH D-75438 Knittlingen Company Karl Storz GmbH D-78532 Tuttlingen
WH58.30-Z-1007-05A	Flexible endoscope package contents 2 (for workshops which already have an approved endoscope from the Wolf or Storz company), Company Richard Wolf GmbH D-75438 Knittlingen Company Karl Storz GmbH D-78532 Tuttlingen
WH58.30-Z-1014-05A	Cylinder inspection equipment