ap9720d0641ts

Check underfloor protection

Type ap · topic 97.20 · version 0201 · 2020-01-13

Applies to: Model 907 with body 613.734/738/834/838 with code ZJ8 (Configuration Mercedes-Benz Minibus (MBM))

Where it sits

Function group 3 Body › 97 Body sealing, corrosion protection › 97.20 Preservation — Series 613 (models 734, 738, 834, 838) · Series 907

EinPAS 40 Preservation/paintwork › 40.20 Corrosion protection › 40.20.45 Underfloor protection — Series 613 (models 734, 738, 834, 838) · Series 907

AP97.20-D-0641TS

Check underfloor protection

09.01.2020

Model

907 with body 613.734/738/834/838

with code ZJ8 (Configuration Mercedes-Benz Minibus (MBM))

Danger

Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents

Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.

AS97.00-Z-0001-01A

Check

1

Visual inspection of underbody protection coating.

If the coating is damaged,

repair damaged points.

After obtaining special order.

Repair

2

Clean damaged areas.


Carefully clean underbody.
The underbody protection can be damaged if the underbody is not cleaned properly.

When cleaning using a high pressure cleaner, ensure that the water temperature is max. 60 °C. Ensure that the water pressure is between 50 - 60 bar and the distance between the lance and the surface being cleaned is not less than 30 cm.

3

Remove any corrosion.

4

Coat bare metal areas.

With commercially available 2K EP primer.
The points to be coated must be completely dry.

5

Apply underbody protection evenly using a brush.

Underbody protection Tectyl 5750 W (20 l)

*BR00.45-Z-1029-05A

Repair materials

Number

Designation

Order number

BR00.45-Z-1029-05A

Underbody protection Tectyl 5750 W (20 l)

A 004 989 26 20 A0
EvoBus Parts Center

Referenced documents