ap8300s8384e

Replace combination filter

Type ap · topic 83.00 · version 0201 · 2015-12-11

Applies to: Model 447 with code HF2 (Pollen filter) Model 447 with code HH4 (THERMOTRONIC automatic climate control) Model 447 with code HH9 (Air conditioner, automatic heater control) Model 448 with code HH4 (THERMOTRONIC automatic climate control)

Where it sits

Function group 3 Body › 83 Climate control › 83.00 General — Series 447 · Series 448

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 447 · Series 448

AP83.00-S-8384E

Replace combination filter

07.12.2015

Model

447

with code HF2 (Pollen filter)

Model

447

with code HH4 (THERMOTRONIC automatic climate control)

Model

447

with code HH9 (Air conditioner, automatic heater control)

Model

448

with code HH4 (THERMOTRONIC automatic climate control)

Replace combination filter

S83.00-4509-09

1

Screw

3

Cover

2

Hose

4

Lock

Remove/install

1

Remove cover on right below dashboard

Model 447.6/7 with code LC7 (Front footwell illumination), model 447.8, 448

AR68.10-S-1520E

2

Remove bolt (1)

3

Remove fuse and relay holder

To do so, unlock the fuse and relay holder and place to one side.

4

Remove cover (3)

To do so, turn locks (4) through 90° and remove cover (3). The hose (2) remains on the cover (3).

Installation: Ensure correct fit at the sealing surfaces.

5

Remove filter insert

Clean inside of filter housing using a lint-free cloth as necessary.

Installation: Check filter insert is correctly seated in filter housing.

6

Install in the reverse order

7

Confirm replacement of filter insert in maintenance booklet or Digital Service Booklet (DSB)

Referenced documents