ap8300s8381cv

Replace dust filter for heating/air conditioning

Type ap · topic 83.00 · version 0103 · 2013-01-24

Applies to: MODEL 415

Where it sits

Function group 3 Body › 83 Climate control › 83.00 General — Series 415

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 415

AP83.00-S-8381CV

Replace dust filter for heating/air conditioning

18.1.13

MODEL

415

Replace dust filter for heating/air conditioning

S83.00-4505-08

1

Glove compartment

7

Clip

8

Air duct

Replace dust filter for heating/air conditioning

2

Screw

3

Cover

S83.00-4506-11

Replace dust filter for heating/air conditioning

S83.00-4507-08

3

Cover

4a

Removal tab

6

Lower dust filter

4

Upper dust filter

5

Guide rail

6a

Removal tab

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1.1

Remove glove box (1)

MODEL 415
with CODE FQ3 (Glove compartment, passenger side, closed)

Remove/install glove compartment

AR68.10-S-1400C

1.2

Remove storage compartment

MODEL 415
without CODE FQ3 (Glove compartment, passenger side, closed)

Remove/install stowage compartment in passenger-side instrument panel bottom section

AR68.10-S-1610C

2

Remove air duct (8)

To do so, remove the clip (7).

Installation: Check the clip (7); replace it if necessary.

3

Remove cover (3)

To do so, unscrew the bolt (2) and remove the cover (3).

4

Remove upper dust filter (4)

Removal: A single-piece dust filter is installed at the factory. It must be destroyed when removed for the first time in order to pull it out.

To do so, pull out the upper dust filter (4) by the removal tab (4a).

5

Remove guide rail (5)

The guide rail (5) guides and stabilizes the upper dust filter (4) and lower dust filter (6).

6

Remove lower dust filter (6)

To do so, pull out the lower dust filter (6) by the removal tab (6a).

7

Install in the reverse order

Referenced documents