ap8300p8381ea

Replacing dust filter for heater/ventilation

Type ap · topic 83.00 · version 0105 · 1998-01-28

Applies to: MODEL 202 up to 31.8.95 with CODE (305a) Dust filter MODEL 202 as of 1.9.95 Dust filter standard

Where it sits

Function group 3 Body › 83 Climate control › 83.00 General — Series 202

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 202

AP83.00-P-8381EA

Replacing dust filter for heater/ventilation

1.12.93

MODEL 202 up to 31.8.95 with CODE (305a) Dust filter

MODEL 202 as of 1.9.95
Dust filter standard

Replacing dust filter for heater/ventilation
Replacing dust filter for heater/ventilation

P83.10-0200-01

P83.10-0203-01

Left figure

2 Cover

3 Retaining clips

Right figure

1 Dust filter

Modification notes

23.9.97

Installation note for combination filter added

see step 3

Removal, installation

1

Remove cover below instrument panel

AR68.10-P-1520K

2

Remove cover (2)

For this purpose slide both retaining clips (3) in the direction indicated by the arrows

3

Pull dust filter (1) down (arrows) and out

Installation: as the activated carbon layer of the combination filter bonds moisture, a combination filter must not be fitted to vehicles with automatic heater (HEAT) (risk of misting)

4

Reinstall in reverse order

Referenced documents