ap8300p8381ca

Replacing dust filter for heater/ventilation

Type ap · topic 83.00 · version 0101 · 2001-10-22

Applies to: MODEL 129

Where it sits

Function group 3 Body › 83 Climate control › 83.00 General — Series 129

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.32 Housing/heat exchanger/evaporator/filter — Series 129

AP83.00-P-8381CA

Replacing dust filter for heater/ventilation

1.12.93

MODEL 129

Replacing dust filter for heater/ventilation
Replacing dust filter for heater/ventilation

P83.10-0213-01

P83.10-0214-01

Left side

Arrows Lip seals

Right side

1 Hood

B10/5 Outside temperature sensor

Arrows Screws and clamps

Replacing dust filter for heater/ventilation

P83.10-0215-01

Arrow Filter cartridge

Removal, installation

1

Pull off lip seals (arrows)

2

Unscrew screws (arrows)

3

Unclip clips (arrows)

4

Pull out outside temperature sensor (B10/5)

5

Remove hood (1)

6

Remove filter cartridge (arrow)

Installation:
Insert new filter cartridge, observe installation position (marking)
The dust filter should always be replaced, never cleaned

7

Clean filter housing and hood (1)

8

Reinstall in reverse order