ap8235b8210b

Windshield washer system - inspect fluid level, adjust to correct level

Type ap · topic 82.35 · version 0100 · 2016-02-12

Applies to: Vehicle 688.232, 688.254, 688.255

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.35 Windshield washing system — Series 688 (models 232, 254, 255)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.1 Basic information — Series 688 (models 232, 254, 255)

AP82.35-B-8210B

Windshield washer system - inspect fluid level, adjust to correct level

12.02.16

Vehicle 688.232, 688.254, 688.255

Windshield washer system - inspect fluid level, adjust to correct level
Windshield washer system - inspect fluid level, adjust to correct level

B82.35-0009-01

B82.35-0015-01

1 Windshield washer reservoir end cover

2 Cabin front end cover

Open

1

Open cabin front end cover (2)

2

Remove windshield reservoir end cover (1)

Check

3

Check windshield washer reservoir liquid level and, if needed, fill up reservoir with proper liquid

Windshield washer liquid - water with neutral domestic detergent.

Close

4

Install windshield washer reservoir end cover (1)

5

Lower front end cover (2) to the end of the course of supporting shock absorber.

Avoid slamming cabin front end cover. To close the end cover, lower it and, holding your hands close to its side edges, first one side and then the other side, push it against cabin stop, locking it in the closed position.