A | Windshield wiper blade |
B | Wiper rubber |
N82.30-2128-04
0 | Windshield wiper off |
I | Windshield wiper low |
II | Windshield wiper high |
INT | Windshield wiper interval |
N82.30-0271-01
| Check | ||
1 | Check the windshield wiper blade (A) and its rubber (B) | In case of damages | |
| |||
Replace damaged parts, with separate billing | |||
2 | Start ignition | ||
3 | Check windshield wiper function at all command positions (arrow 1) | In the case of damage or malfunction | |
| |||
Eliminate damages or malfunction with separate billing | |||
4 | Activate the windshield wiper set (arrow 2) | The water pump and the windshield wiper must turn on at the same time. | |
In case of malfunction | |||
| |||
Eliminate malfunction with separate billing | |||
5 | Check function of the nozzle | In case of malfunction | |
| |||
Eliminate malfunction with separate billing | |||
6 | Switch on the low beams | ||
7 | Activate the windshield wiper set (arrow 2) | Turn on the windshield wiper set and the headlight washer system at the same time for the activation duration. | |
8 | Check functioning of the headlight washer nozzle | In the case of damage or malfunction | |
| |||
Eliminate damages or malfunction with separate billing | |||
9 | Switch off the illumination and ignition | ||
10 | Check level in the windshield washer water tank, fill up if necessary |