ap8210d8260f

Check and correct the adjustment of the headlamps

Type ap · topic 82.10 · version 0101 · 2015-08-20

Applies to: Model 909

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.10 Exterior lights — Series 909

EinPAS 30 Lighting system › 30.15 Exterior lights › 30.15.40 Headlamp — Series 909

AP82.10-D-8260F

Check and correct the adjustment of the headlamps

17.8.15

Model

909

Check and correct the adjustment of the headlamps

1

Horizontal adjusting device

2

Vertical adjusting device

D82.10-0006-01

Check and correct the adjustment of the headlamps

Course of light/dark border of low beam when reflector is aligned

D82.10-0007-01

Check and correct the adjustment of the headlamps

Course of light/dark border of front fog lamp when reflector is aligned

D82.10-0008-01

Check

1

Drive vehicle to level surface

Vehicle must be in ready-to-drive condition (unladen mass, full fuel tank or corresponding additional weight). Driver seat loaded with 75 kg.

2

Check and correct tire inflation pressure

3

Align and adjust headlamp aimer as per the operating instructions

000 588 11 21 00 Adjustment device

WS82.00-P-0151B

4

Set headlamp range adjustment switch to position "0"

5

Open engine hood

6

Check low beam setting and correct if necessary

AP82.10-D-8260-01F

The reflector is aligned by turning the horizontal adjusting device (1) and vertical adjusting device (2).

7

Check setting of high beam

AP82.10-D-8260-02F

8

Close engine hood

9

Remove additional weights from vehicle

Referenced documents