ap4340b4356a

Retarder - check gap

Type ap · topic 43.40 · version 0101 · 2020-03-13

Applies to: Model 384.063/065 with code BB2 (Telma retarder)

Where it sits

Function group 2 Chassis › 43 Brakes - pneumatic system and auxiliary brakes › 43.40 Retarder (electric) — Series 384 (models 063, 065)

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.21 Retarder › 21.21.30 Housing/cap/shaft/retarder — Series 384 (models 063, 065)

AP43.40-B-4356A

Retarder - check gap

12.03.2020

Model	384.063/065
	with code BB2 (Telma retarder)

Retarder - check gap

Image of the retarder outside the vehicle

1	Rotor
2	Stator

A	Clearance

B43.40-0005-06

	Check
1	Check the play (A) existing between the front rotor (1) and the stator pole (2)	 Utilize a feeler gauge.
		 Measure the clearance (A) at all the stator's poles (2) and then find the average value of these measures. The average value must be in accordance with the prescribed measure.
		.Dimension of the clearance between the front rotor and the stator	*BE43.40-B-1001-01B
		If the average value found out is not in accordance with the prescribed values
		
		Adjust the clearance (A) invoicing separately.
2	Repeat the clearance check (A) for the rear rotor (1)	.Dimension of the clearance between the frear rotor and the stator	*BE43.40-B-1002-01B
		If the average value found out is not in accordance with the prescribed values
		
		Adjust the clearance (A) invoicing separately.

Retarder test values (electric)

Number	Designation		Vehicle 384.063
BE43.40-B-1001-01B	Dimension of the clearance between the front rotor and the stator	mm	1,4(+0/-0,15)

Retarder test values (electric)

Number	Designation		Vehicle 384.063
BE43.40-B-1002-01B	Dimension of the clearance between the frear rotor and the stator	mm	1,4(+0/-0,15)