G00.20-A006-74
| Check | ||
1 | Switch on ignition. | A function check of all systems is carried out. The main menu is shown on the multifunction display. | |
2 | Press button (2) or button (4) until the main menu (6) is displayed. | ||
3 | Press button (1) or button (3) until the "Maintenance" menu window is displayed. | ||
4 | Press "OK" button (5). | ||
5 | Press button (1) or button (3) until "Axle 1 brakes" is shown. | The estimated remaining time and remaining distance are displayed. | |
If a low remaining time/remaining distance is displayed, | |||
| |||
visually check brake pad thickness at inspection holes of brake carrier plates. | |||
The wear limit of the brake pads is denoted by a stepped edge. | |||
If the brake pad thickness is no longer sufficient, | |||
| |||
replace brake linings. | |||
|
| ||
| Remove/install front brake shoes | ||
After obtaining special order. | |||
6 | Press button (3) to select "Axle 2 brakes". | The estimated remaining time and remaining distance are displayed. | |
If a low remaining time/remaining distance is displayed, | |||
| |||
vsually check brake pad thickness at inspection holes of brake carrier plates. | |||
The wear limit of the brake pads is denoted by a stepped edge. | |||
If the brake pad thickness is no longer sufficient, | |||
| |||
replace brake linings. | |||
|
| ||
After obtaining special order. | |||
7 | Repeatedly pressing the button (3) enables the values of the other axles to be read out in the multifunction display. | ||
Axle assignment of brake lining sensors | |||
Enter the read out measurement values on the maintenance sheet. | |||
8 | Press "OK" button (5) to exit menu (6). |
Referenced documents
- ah4210n100701a Axle assignment of brake lining sensors
- ar4210w0165z Remove/install brake shoes at rear axle
- ar4210w1021za Remove/install front brake shoes
- ar4210w1021zb Remove/install front brake shoes