1 | Display |
2 | Button (exit menu) |
3 | Button (scrolling upwards) |
4 | Button (Select) |
5 | Button (scrolling downwards) |
6 | Reset button |
N00.20-2149-05
1 | Switch on ignition | A function check of all systems is carried out. The basic menu is shown in the display (1). | |
2 | Use button (2) to enter menu | ||
3 | Press button (3 or 5) repeatedly until the "Diagnosis" menu is shown. | ||
4 | Press key (4) in order to call up the submenu. | ||
5 | Press button (3 or 5) repeatedly until the "WS" menu is shown. | ||
6 | Press key (4) in order to call up the submenu. | ||
7 | Press button (3 or 5) repeatedly until the "Measurement values" menu is shown. | ||
8 | Press key (4) in order to call up the submenu. | ||
9 | By repeatedly pressing button (3 or 5) select and read out measurement values MW6 to MW13 in the display (1) | Do not actuate the service brake during the read out process. | |
10 | Enter the read out test values on the maintenance sheet. | ||
Axle assignment of brake lining sensors | |||
11 | Press button (2) repeatedly until main menu is displayed | ||
12 | Switch off ignition |
Referenced documents
- ah4210n100701a Axle assignment of brake lining sensors