ap3530a3560a

Rear axle - adjusting adjustment screw with sliding block

Type ap · topic 35.30 · version 0101 · 2005-04-26

Applies to: Rear axle 745.800 in model NAB372.124 /317

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 372 (models 124, 317)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.30 Rear axle assembly — Series 372 (models 124, 317)

EinPAS 17 Drivetrain/axle › 17.52 Additional axle › 17.52.30 Additional axle, complete — Series 372 (models 124, 317)

Also applies to engines/gearboxes: 745 800

AP35.30-A-3560A

Rear axle - adjusting adjustment screw with sliding block

21.3.01

Rear axle 745.800 in model NAB372.124 /317

Rear axle - adjusting adjustment screw with sliding block

T35.30-0004-01

1 Adjusting screw

2 Nut

3 Sliding block

1

Slacken nut (2)

2

Screw in adjusting screw (1) until the sliding block (3) abuts the ring gear

3

Adjust the gap between the sliding block (3) and adjusting screw (1)

To do this, unscrew the adjusting screw (1) through a rotation angle of 60°.

4

Tighten nut (2)

While countering the adjustment screw (1).