P33.20-2156-11
3 Rubber boot
4 Lower transverse control arm
7 Support joint
7f Rubber boot
78 Link rod
P33.20-2157-01
5 Follower joint
6 Upper transverse control arm
8 Rubber boot
| Checking | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Raise vehicle with vehicle lift | ||
| Lift/jack up vehicle | ||
2 | Check rubber boots (7f) of supporting ball joints (7) for leaks and condition | If the rubber boot (7f) is leaking: | |
Install new supporting joint (7): | |||
| Vehicles with 4MATIC | ||
| Vehicles without 4MATIC | ||
3 | Check rubber boots (3) of link rods (78) of stabilizer bar for leaks and condition | If rubber boot (3) is leaking, replace link rod (78): | |
| Remove/install torsion bar on front axle. | ||
4 | Check upper ball joints (5) | Check rubber boots (8) of upper ball joints (5) for leaks and condition. Check upper ball joints (5) for play by pulling and pushing firmly on the steering knuckles. If the rubber boot (8) is leaky or if there is play in the upper ball joint (5): | |
Replace upper transverse control arm (6): | |||
| Left upper transverse control arm | ||
| Right upper transverse control arm | ||
5 | Lower vehicle | ||
| Lift/jack up vehicle |
Referenced documents
- ar0060p1000rt Lift/jack up vehicle
- ar3220p0300rt Remove/install stabilizer bar on front axle
- ar3320p0440rt Replace supporting joint
- ar3320p0440rtc Replace supporting joint
- ar3320p0500rt Remove/install upper control arm
- ar3320p0500rta Remove/install upper control arm
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.