Front axle - oil change

AP33.00-S-3301A

Front axle - oil change

2.12.13

MODEL

639.601/603/605/701/703/705/711/713/811/813/815

with CODE ZG2 (Permanent all-wheel drive)

1

Drain screw

2

Filling screw

3

Front axle gear

Drain oil

 Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Clean area around drain screw (1) and filling screw (2)

2

Position a suitable receptacle under drain screw (2)

3

Remove filling screw (2) and drain screw (1) and drain transmission oil

 Clean the magnet of the drain screw (1).
Replace the sealing rings of the filling screw (2) and drain screw (1).

4

Screw in drain screw (1)

 Oil drain screw

*BA33.30-N-1003-03B

Pour in oil

5

Pour in transmission oil up to bottom edge of filler opening on front axle transmission (3)


It is essential to avoid overfilling the front axle transmission (3).
Oil leaks can otherwise occur.

 Front axle gear

*BF33.30-N-1001-03A

6

Screw in filling screw (2)

 Oil filler screw

*BA33.30-N-1002-03B

7

Confirm transmission oil change in maintenance booklet/DSB

 Front axle gear

Number

Designation

MODEL 639
with CODE ZG2 (Permanent all-wheel drive)
without CODE XZ1 (Model generation 1)

MODEL 639
with CODE XZ1 (Model generation 1)
with CODE ZG2 (Permanent all-wheel drive)

BA33.30-N-1002-03B

Oil filler screw

Nm

50

50

 Front axle gear

Number

Designation

MODEL 639
with CODE ZG2 (Permanent all-wheel drive)
without CODE XZ1 (Model generation 1)

MODEL 639
with CODE XZ1 (Model generation 1)
with CODE ZG2 (Permanent all-wheel drive)

BA33.30-N-1003-03B

Oil drain screw

Nm

50

50

 Front axle gear

Number

Designation

MODEL 639
with CODE ZG2 (Permanent all-wheel drive)

BF33.30-N-1001-03A

Front axle gear

Filling capacity

Liter

0,65

Sheet

BB00.40-P-0235-08A