ap2040b2002evi

Bevel gear of fan drive - Oil change

Type ap · topic 20.40 · version 0100 · 2018-04-14

Applies to: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.40 Fan, fan clutch — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.40 Bevel gear/drive shaft — Series 382 (models 155, 189) · Series 936 (models 9**)

AP20.40-B-2002EVI

Bevel gear of fan drive - Oil change

09.04.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Bevel gear of fan drive - Oil change

1

Angled gear drive

2

Filling screw

3

Drain screw

B20.40-0041-06

Drain

Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

1

Open the engine compartment

Note the instructions from bodybuilder.

2

Remove the drain screw (3) from the angled gear drive (1) and completely drain the oil

Catch the oil in an appropriate container and discard it according to the local laws.

3

Install the drain screw (3) of the angled gear drive (1)

Use a new sealing ring.

Bevel gear drain plug

*BA20.40-B-1012-01EVI

Refill

4

Remove the drain screw (2) of the angled gear drive (1)

Refuel with the recommended lubricating oil.

5

Install the drain screw (2) of the angled gear drive (1)

Use a new sealing ring.

Bevel gear filler plug

*BA20.40-B-1011-01EVI

Check

6

Check the screws (2,3) of the angled gear drive (1) for leak tightness

Only visual test, after disconnect the engine.

7

Close the engine compartment

Note the instructions from bodybuilder.

Fan, fan coupling

Number

Designation

ENGINE 936.9

BA20.40-B-1011-01EVI

Bevel gear filler plug

Nm

35

Fan, fan coupling

Number

Designation

ENGINE 936.9

BA20.40-B-1012-01EVI

Bevel gear drain plug

Nm

35

Referenced documents