Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

AP20.00-S-2010P

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

09.11.2018

Engine

200.7 in model 470

Engine

699.3 in model 470, 471

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

 Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01P

Topical note

Notes on coolant

AH20.00-N-2080-01A

Notes on coolant level

AH20.00-P-1142-01CW



Check

1

Check fluid level.

 Only check fluid level at a coolant temperature lower than 50 °C.
Before correcting the fluid level, check the anticorrosion and antifreeze protection.
The fluid level must lie between the Minimum and Maximum marking (arrow) on expansion reservoir.

2

Unscrew cap of expansion reservoir.

3

Check anticorrosion and antifreeze protection.

 Commercially available tools
Antifreeze tester (refractometer)

If the anti-corrosion and antifreeze protection is too low,



correct anticorrosion and antifreeze protection.



Coolant specifications

BB00.40-P-0310-01A

AP20.00-S-2010-01P


Do not use coolant or antifreeze in accordance with the Specifications for Operating Fluids sheet 325.0/6 or 326.0/6.
Engine damage can occur otherwise.

 Use the corresponding antifreeze NISSAN LONG LIFE COOLANT L255N (1-l container).
Make sure that the mixing ratio of the coolant is correct.

 Drain screw to coolant pipe

*BA20.20-N-1001-01PD

 Coolant

*BF20.00-N-1001-01PD

Correct

4

Correct fluid level.

Only if the fluid level is too low.


Do not use coolant or antifreeze in accordance with the Specifications for Operating Fluids sheet 325.0/6 or 326.0/6.
Engine damage can occur otherwise.

 Make sure that the mixing ratio of the coolant is correct.

5

Tighten cap on expansion reservoir.

 Cooler, coolant hoses, coolant lines

Number

Designation

Engine 200 in model 470

Engine 699 in model 470, 471

BA20.20-N-1001-01PD

Drain screw to coolant pipe

Nm

4

7

 Filling capacity for engine cooling system

Number

Designation

Engine 200 in model 470

Engine 699 in model 470, 471

BF20.00-N-1001-01PD

Coolant

Liter

 7,3

 11,1

Sheet

BB00.40-P-0325-07A

BB00.40-P-0325-07A