ap2000b2010ls

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

Type ap · topic 20.00 · version 0300 · 2019-06-13

Applies to: Engine 350.900 in model 979.270/272 Engine 924.999 in model 979.276/277/278/279

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 350 (models 900) · Series 979 (models 270, 272, 276, 277, 278, 279)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 350 (models 900) · Series 979 (models 270, 272, 276, 277, 278, 279)

Also applies to engines/gearboxes: 924 999

AP20.00-B-2010LS

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

05.06.2019

Engine

350.900 in model 979.270/272

Engine

924.999 in model 979.276/277/278/279

Modification notes

17.05.2019

Cooling system - Approximate level

BF20.00-B-1001-01F

17.05.2019

Cooling system - Approximate level

BF20.00-B-1001-01K

Engine cooling system - check fluid level, adjust to correct level. Inspect     
	anticorrosion/antifreeze protection, adjust to correct concentration

LO 915, LO 916

1

Cooling system reservoir cover

2

Cooling system reservoir

B20.00-0070-01

Check

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

1

Remove coolant system reservoir end cover (1)

2

Check the cooling system coolant level in the reservoir (2)

There is a maximum and minimum level indication on the cooling system reservoir.

3

Correct the coolant level, if necessary

Topical note

Notes on coolant

AH20.00-N-2080-01A

4

Correct the coolant level, if necessary

Correct the coolant level, adding the recommended coolant, until reaching the cooling system's reservoir maximum level marking (Max.).

5

Carry out concentration correction, if necessary


Engine 924.999

AP20.00-B-2010-01A

Engine 924.999Cooling system - Approximate level

*BF20.00-B-1001-01F

Motor 350.900;Cooling system - Approximate level

*BF20.00-B-1001-01K

6

Install cooling system reservoir end cover (1)

Make sure the cap is perfectly screwed-on and tightened.

Engine cooling system capacity

Number

Designation

Engine 924.999 in Type 685.203, 979.2

BF20.00-B-1001-01F

Cooling system - Approximate level

Vehicles without retarder

Litros

20

Do not mix products between classes

Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5

%

50

Anti-corrosion CLASS MB 312.0

%

10

Product already diluted

Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3

Litros

20

Vehicles with retarder

Litros

-

Do not mix products between classes

Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5

%

-

Anti-corrosion CLASS MB 312.0

%

-

Engine cooling system capacity

Number

Designation

Engine 350.900 in Type 979.27

BF20.00-B-1001-01K

Cooling system - Approximate level

Do not mix products between classes

litros

6,4

Anti-corrosive/antifreeze MB CLASS 325.0

%

50

Pressure in the system

bar

1

Referenced documents