1 | Hose clamp |
2 | Electrical connector |
3 | Bolts |
P09.10-2334-11
P09.10-2333-08
4 | Clips | 7 | Air cleaner housing | |
5 | Air filter element | 8 | Engine air intake duct downstream of air filter | |
6 | Air filter housing cover |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Release and disconnect electrical connection (2) | ||
2 | Loosen hose clamp (1) | ||
3 | Release clamps (4) | ||
4 | Remove bolts (3) | ||
5 | Raise air filter housing cover (6) and pull out of engine air intake duct downstream of air filter (8) | ||
6 | Take out air cartridge (5) | ||
| Clean | ||
7 | Clean inside air filter housing cover (6) and air filter housing (7) | ||
| Install | ||
8 | Insert new air filter insert (5) into air filter housing (7) | ||
9 | Inset air filter housing cover (6) into engine air intake duct downstream of air filter (8) | ||
10 | Tighten bolts (3) | ||
11 | Fasten clamps (4) into place | ||
12 | Tighten hose clamp (1) | ||
13 | Connect and lock electrical connection (2) | ||
Reset adaptation data | |||
14 | Reset adaptation data using diagnostic system after air filter change | ||
| |||
Reset adaptation data in vehicle diagnosis system as follows: |
Referenced documents
- ad0000p200004b Connect STAR DIAGNOSIS and read out fault memory
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.