Replace air filter element · ap0910p0980e · Mercedes-Benz WIS

AP09.10-P-0980E

Replace air filter element

21.03.2017

Engine

276.8 in model 166, 172, 205, 207, 212, 213, 217, 218, 222, 231, 238, 251, 253, 292

P09.10-2346-09

Shown on model 292

Engine cover

Show on model 238

1	Pressure sensors
2	Air filter housing cover
3	Air filter element
4	Air cleaner housing
5	Bolts

P09.10-2393-06

 Warning	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Preparatory activity
1	Open engine hood and raise to vertical position	Engine 276.8 in model 166, 172, 205, 207, 212, 213, 217, 218, 222, 231, 238, 251, 253, 292
		Engine 276.8 in model 166	AR88.40-P-1000GQ
		Engine 276.8 in model 172.4	AR88.40-P-1000V
		Engine 276.8 in model 207, 212	AR88.40-P-1000EW
		Engine 276.8 in model 217, 222	AR88.40-P-1000LCA
		Engine 276.8 in model 251	AR88.40-P-1000RT
		 Engine 276.8 in model 207, 212 with code U60 (Active Bonnet (Pedestrian protection)) Move hood to upright position: Left and right tensioning lever must be removed at top from left and right hinge.
2	Remove engine cover (9)
	Remove
3	Release and disconnect electrical connectors from pressure sensors (1)
4	Remove bolts (5), remove air filter housing cover (2) and take out air filter elements (3)	 The bolts (5) remain in the air filter housing covers (2).
	Clean
5	Clean the insides of the air filter housing cover (2) and air filter housing (4)
	Install
6	Insert new air filter elements (3) into air filter housing (4)
7	Position air filter housing cover (2) and tighten bolts (5)
8	Connect electrical connectors to pressure sensor (1) and lock
	Finishing activity
9	Install engine cover (9)
10	Close engine hood	Engine 276.8 in model 166, 172, 205, 207, 212, 213, 217, 218, 222, 231, 238, 251, 253, 292
		Engine 276.8 in model 166	AR88.40-P-1000GQ
		Engine 276.8 in model 172.4	AR88.40-P-1000V
		Engine 276.8 in model 207, 212	AR88.40-P-1000EW
		Engine 276.8 in model 217, 222	AR88.40-P-1000LCA
		Engine 276.8 in model 251	AR88.40-P-1000RT
		 Engine 276.8 in model 207, 212 with code U60 (Active Bonnet (Pedestrian protection)) Move hood to closed position: Left and right tensioning lever must be mounted at top on left and right hinge.

Referenced documents

ah0000p500001a Notes on avoiding damage through contamination and foreign objects
ah5400p000101a Information on preventing damage to electronic components due to electrostatic discharge
ar8840p1000ew Opening engine hood, moving to upright position and closing
ar8840p1000gq Opening engine hood, moving to upright position and closing
ar8840p1000lca Opening engine hood, moving to upright position and closing
ar8840p1000rt Opening engine hood, moving to upright position and closing
ar8840p1000v Opening engine hood, moving to upright position and closing
as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.