P09.10-A030-09
Shown on model 461.333 |
1 | Front right wheel well paneling | 3 | Air intake dust removal cap |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Preparatory activity | |||
1 | Lift vehicle with lifting platform. | ||
| |||
| Remove | ||
2 | Remove front right wheel well paneling (1). | ||
| Clean | ||
3 | Squeeze air intake dust removal cap (3) together and clean with water in case of soiling. | ||
| Install | ||
4 | Install front right wheel well paneling (1). | ||
Finishing activity | |||
5 | Lower vehicle with vehicle lift. | ||
|
Referenced documents
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ar0060p1006a Raise/lower vehicle with vehicle lift
- as0000z000901a Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts