A = Maintenance of major assemblies |
N00.00-3428-11
Customer: $$KUNDE$$ | Order number: $$AUFTRAGSNUMMER$$ |
VIN/license plate number: $$FIN$$ / $$KENNZEICHEN$$ | $$KILOMETER$$ $$AKTUELLEKILOMETER$$ |
Due date: $$FAELLIGKEIT$$ | Remaining time (service/DPF): $$RESTLAUFZEIT$$ |
Completion time/date: $$FERTIGDATUM$$ | Service contract present: $$SERVICEVERTRAG$$ |
Notes/explanations: $$HINWEIS$$ $$OELFUSSNOTE$$ |
The following activities are hereby confirmed: |
Signature |
A | Input condition not OK: | | |||||
Completed | |||||||
| |||||||
| | ||||||
Inspection through Service Advisor | |||||||
| Check vehicle for damage to paint, and corrosion and accident damage. |
| | ||||
| Side guards, roof/side spoiler. |
| | ||||
| Seat belts: Check condition and function. |
| | ||||
| Date of the tachograph inspection. |
| | ||||
| Remove loose objects from the cab. |
| |||||
| Determine oil quality for oil change of major assemblies. |
| |||||
Enter oil quality for each maintenance point. | |||||||
Completion work on maintenance system | |||||||
| Process service data in display. |
| |||||
Confirm work conducted, reset intervals. | |||||||
Additional operations | |||||||
Brakepad wear (only to be filled out if additional operation is due) |
Brake wear in % | ||||
Left | Right | |||
Front module control unit | ||||
Axle A1 | MW/A 2 | MW/A 3 | ||
Axle A2 | MW/A 4 | MW/A 5 | ||
Rear module control unit | ||||
Axle A3 | MW/A 2 | MW/A 3 | ||
Axle A4 | MW/A 4 | MW/A 5 | ||
MW/A = Measurement (value in display) | Note: 0 % = New condition; 100 % = Lining worn. | |||
Brakepad thickness of drum brake (only to be filled out if additional operation is due) |
Brake lining thickness in mm | ||
Left | Right | |
Front axle 1 | ||
Front axle 2 | ||
Rear axle 1 | ||
Rear axle 2 | ||
Rear axle 3 | ||
Rear axle 4 | ||
Referenced documents
- ap0020w0041a Process service data in display