AP00.20-T-0010CA | Inspection | 10.1.06 |
MODEL NMB613.368 with ENGINE 457.941 with TRANSMISSION 714.120 with REAR AXLE 746.211 /216 with CODE (B10) Voith retarder R115 (integrated)
mit Lenkung ZF 8098 für O560
T00.10-0003-01
Bus
O 560
1st inspection
Chassis no.: _________________________ Order number:_________________________ Total distance (km) __________________ Motor vehicle license: ____________________ Date: _____________ Confirm carrying out the work by signature. Mechanic: _____________________________________ |
Check by Customer service adviser | Condition on receipt OK NOT OK | ||
| Check vehicle for damage to paintwork, corrosion and accident damage | | |
| Date of tachograph inspection | | |
| Due date of main inspection (HU) | | |
| Due date of safety inspection (SP) | | |
| Due date of exhaust emissions inspection (AU) | | |
| Read out fault memory | | |
Inspection | Completed | ||
Check and correct fluid level | Ensure leaktightness. In the event of a fluid loss which is not due to consumption, determine cause and eliminate subject to separate repair order. | ||
| Engine | | |
| Check oil level | ||
| Manual transmission | | |
| Air conditioning: Check refrigerant level | | |
| Retarder | | |
| Rear axle | | |
| Power steering | | |
Check for leaks and check condition | Pay attention to chafing marks and routing. | ||
| Check all lines, hoses and sensor cables | | |
Engine | |||
| Inspect poly V-belt for wear and damage | | |
| V-belt: Check condition and retension if necessary | | |
| Align engine mount | | |
Check nuts and bolts for firm seating | Tighten if necessary. | ||
| Chassis and body: - Engine mount on substructure, propeller shaft flanges - Steering idler arm bearing brackets, end crossmember on substructure, trailer hitch Front axle: - Control arm attachments, control arm plate, supporting strut levers - Supporting struts, shock absorber mounts, shock absorbers, stabilizer bar Rear axle - Control arm attachments on substructure, stabilizer bar | | |
Tighten screws and nuts | Observe official torque specifications. | ||
| Spring bracket on spring support | | |
| Chassis and body | | |
| Wheels | | |
Final inspection | |||
| Test drive or test stand | Pay attention to road safety. Check brakes, steering, tires, illumination and signaling system. | |
Mercedes-Benz Türk A.Ş. | After Sales Servis SSH/SST-EL | Satış Sonrası Hizmetleri SSH/SST-EL |
Referenced documents
- ap0020t0051ca All lines and hoses, sensor cables - checking tightness and condition
- ap0020t007303ca Retighten spring bracket on air bellows support of rear axle
- ap0020t0073ca Tightening bolts and nuts. Observe official torque specifications. Chassis and body
- ap1320t1350ca Inspect condition of V-belt, re-tension
- ap2600t2610ca Manual transmission - check oil level, correct
- ap3510t3510ca Rear axle - check fluid level, adjust to correct level
- ap4010t4070a Re-tighten wheel bolts or nuts
- ap4330t4310ca Retarder - checking, correcting oil level
- ap4600t4611ca Check and correct power steering fluid level
- ar1800t303501ca Inspect oil level