T00.00-0001-01
Bus
O 345/ O 345 G
Inspection
Chassis no.: ____________________________ Order number: _______________________________ Total distance (km) ____________________ Motor vehicle license: _______________________ Date: _____________ Confirm carrying out the work by signature. Mechanic: ___________________________________ |
Check by Customer service adviser | Condition on receipt OK NOT OK | ||
| Check vehicle for damage to paintwork, corrosion and accident damage | | |
| Date of tachograph inspection | | |
| Due date of main inspection (HU) | | |
| Due date of safety inspection (SP) | | |
| Due date of exhaust emissions inspection (AU) | | |
| Read out fault memory | | |
Inspection | |||
Check and correct fluid level | Ensure leaktightness. In the event of a fluid loss which is not due to consumption, determine cause and eliminate subject to separate repair order. | ||
| Engine | | |
| Manual transmission | Transmission 714.120/140 | |
| Automatic transmission | Transmission 721.103/104/172/440/460 | |
Transmission 721.108/109/141/151/181/ 182/446/447/462 | |||
| Air conditioning: Check refrigerant level | Only on model NMB 671.015/020/021/030/042 without Konvekta ACX 602 air conditioning with roof heater, code HKA and on model NMB 671.030 without Sütrak AC 353 air conditioning without roof heater, code HKC | |
Only on model NMB 671.015/020/021/030/042 with Konvekta ACX 602 air conditioning with roof heater, code HKA | |||
Only on model NMB 671.030 with Sütrak AC 353 air conditioning without roof heater, code HKC | |||
| Retarder | | |
| Power steering | | |
| Rear axle | | |
Check for leaks and check condition | Pay attention to chafing marks and routing. | ||
| Check all lines, hoses and sensor cables | | |
Engine: | |||
| Inspect poly V-belt for wear and damage | | |
Check nuts and bolts for firm seating | Tighten if necessary. | ||
| Chassis and body: - Engine mount on substructure, propeller shaft flanges - Steering idler arm bearing brackets, end crossmember on substructure, trailer hitch Front axle: - Control arm attachments, control arm plate, supporting strut levers - Supporting struts, shock absorber mounts, shock absorbers, stabilizer bar Rear axle - Control arm attachments on substructure, stabilizer bar Additionally on O 345 G: - Control arm mounting bolts - Turntable bearing - Turntable supporting strut - Angle sensor unit - Steering angle sensor | | |
Tighten screws and nuts | Observe official torque specifications. | ||
| Wheels | | |
| Chassis and body: Rear axle - Air bellows support - Trailing arm to spring support | ||
Final inspection | |||
| Test drive or test stand | Pay attention road safety. Check brakes, steering, tires, illumination and signaling system. | |
Mercedes-Benz Türk AŞ | After Sales Service M/AST | Satış Sonrası Hizmetleri M/AST |
Referenced documents
- ap0020t0051a All lines and hoses, sensor cables - checking tightness and condition
- ap0020t0071a Checking nuts and bolts for tight seating. Retightening according to condition. Chassis and body
- ap1322t1351a Inspect poly V-belt for wear and damage
- ap2600t2610a Manual transmission - check oil level, correct
- ap2700t2710a Automatic transmission - Check, correct oil level
- ap4010t4070a Re-tighten wheel bolts or nuts
- ap4600t4611a Check and correct power steering oil level
- ap8330t8312aa Air conditioning - checking refrigerant level
- ap8330t8312ab Air conditioning system - checking refrigerant level